Concept Guide

82 | dynamic-cpu-mgmt Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
dynamic-cpu-mgmt
dynamic-cpu-mgmt {auto| disable| enable}
Description
This command enables or disables the dynamic CPU management feature, to manage resources across
different functions performed by a W-IAP.
Syntax
Parameter Description
auto
Configures the W-IAP to automatically enable or disable CPU management
feature during run-time. When configured, the W-IAP determines the need for
enabling or disabling CPU management, based on the real-time load
calculations taking into account all different functions that the CPU needs to
perform.
The auto option is the default and recommended setting.
disable
Disables CPU management on all APs, typically for small networks. This setting
protects the user experience.
enable
Enables the CPU management feature. When configured, the client and network
management functions are protected. This setting helps in large networks with a
high client density.
Usage Guidelines
Use this command to enable or disable resource management across different functions performed by a W-
IAP.
Example
The following example enables the automatic enabling or disabling of CPU management:
(Instant AP)(config)# dynamic-cpu-mgmt auto
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-3.4.0.0 This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode