Concept Guide

626 | wlan ssid-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
Command/Parameter Description Range Default
traffic from legacy devices or traffic from
applications or devices that do not support QoS.
wmm-video-dscp <dscp>
Allows you to specify the DSCP mapping value for
the video traffic.
0—63 —
wmm-video-share
<share>
Allocates bandwidth for video traffic generated
from video streaming.
— —
wmm-voice-dscp <dscp>
Allows you to specify the DSCP mapping value for
the voice traffic.
0—63 —
wmm-voice-share
<share>
Allocates bandwidth for voice traffic generated
from the incoming and outgoing voice
communication.
— —
work-without-uplink
Allows the SSID to be used without an uplink
connection
— —
wpa-passphrase
<passphrase>
Defines a WPA passphrase with which you can
generate a pre-shared key (PSK).
— —
zone <zone>
Allows you to specify a zone for SSID. If an SSID
belongs to a zone, it is not broadcast on any AP
which does not belong to the zone.
Usage Guidelines
Use this command to configure a WLAN SSID profile to set up an employee, voice, or guest network.
Example
The following example configures an employee WLAN SSID profile:
(Instant AP)(config)# wlan ssid-profile employee1
(Instant AP)(SSID Profile "employee1")# type employee
(Instant AP)(SSID Profile "employee1")# essid employee1
(Instant AP)(SSID Profile "employee1")# enable
(Instant AP)(SSID Profile "employee1")# vlan 1
(Instant AP)(SSID Profile "employee1")# wpa-passphrase user@123
(Instant AP)(SSID Profile "employee1")# opmode wpa2-psk-aes
(Instant AP)(SSID Profile "employee1")# max-authentication-failures 0
(Instant AP)(SSID Profile "employee1")# mac-authentication
(Instant AP)(SSID Profile "employee1")# l2-auth-failthrough
(Instant AP)(SSID Profile "employee1")# termination
(Instant AP)(SSID Profile "employee1")# blacklist
(Instant AP)(SSID Profile "employee1")# mac-authentication
(Instant AP)(SSID Profile "employee1")# auth-server InternalServer
(Instant AP)(SSID Profile "employee1")# rf-band all
(Instant AP)(SSID Profile "employee1")# dtim-period 1
(Instant AP)(SSID Profile "employee1")# inactivity-timeout 1000
(Instant AP)(SSID Profile "employee1")# broadcast-filter none
(Instant AP)(SSID Profile "employee1")# dmo-channel-utilization-threshold 90
(Instant AP)(SSID Profile "employee1")# local-probe-req-thresh 0