Concept Guide

624 | wlan ssid-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
Command/Parameter Description Range Default
machine authentication.
Machine authentication is only supported on
Windows devices, so this can be used to
distinguish between Windows devices and other
devices such as iPads.
set-role-pre-auth
<role>
Configures a pre-authentication role to allow
some access to the guest users before the client
authentication.
— —
set-role-unrestricted
Configures unrestricted access control. — —
set-vlan <attribute>
{{contains|ends-with|
equals|matches-
regular-expression|
not-equals|starts-
with}
<operand>
<vlan>|value-of}
Assigns a VLAN to the clients. The first rule that
matches the configured condition is applied.
You can specify any of the following conditions:
l contains—The rule is applied only if the
attribute value contains the specified string.
l ends-with—The rule is applied only if the
attribute value ends with the specified string.
l equals—The rule is applied only if the
attribute value is equal to the specified string.
l not-equals—The rule is applied only if the
attribute value is not equal to the specified
string.
l starts-with—The rule is applied only if the
attribute value begins with the specified
string.
l value-of - This rule sets the VLANto the value
of the attribute returned. To set a user role,
the value of the attribute must already be
configured on the W-IAP.
l matches-regular-expression—The rule is
applied only if the attribute value matches the
regular expression pattern specified in
Operand. This operator is available only if the
mac-address-and-dhcp-options attribute is
selected in the Attribute drop-down.
— —
strict-svp
Enables Strict Spectralink Voice Protocol (SVP)
and prioritizes voice traffic for SVP handsets.
tspec
Allows the APs to prioritize time-sensitive traffic
such as voice traffici initiated by the client.