Concept Guide

Command/Parameter Description Range Default
captive portal to regain access.
rrm-quiet-ie
rf-band <band>
Configures the radio frequency band on which
this SSID will be broadcast. You can select either
2.4GHz, 5 GHz, or all to specify both bands.
2.4 GHz, 5
GHz, all
all
server-load-balancing
Enables load balancing across two RADIUS
servers if two authentication servers are
configured for the SSID.
— Enabled
set-role
{{contains|ends-with|
equals|matches-
regular-expression|
not-equals|starts-
with}
<operand>
<role>|value-of}
Assigns a user role to the clients. The first rule
that matches the configured condition is applied.
You can set any of the following conditions:
l contains—The rule is applied only if the
attribute value contains the specified string.
l ends-with—The rule is applied only if the
attribute value ends with the specified string.
l equals—The rule is applied only if the
attribute value is equal to the specified string.
l not-equals—The rule is applied only if the
attribute value is not equal to the specified
string.
l starts-with—The rule is applied only if the
attribute value begins with the specified
string.
l value-of - This rule sets the user role to the
value of the attribute returned. To set a user
role, the value of the attribute must already
be configured on the W-IAP.
l matches-regular-expression—The rule is
applied only if the attribute value matches the
regular expression pattern specified in
Operand. This operator is available only if the
mac-address-and-dhcp-options attribute is
selected in the Attribute drop-down.
— —
set-role-by-ssid
Configures a user role based on the type of SSID
configured.
— —
set-role-mac-auth
<mac-only>
Configures a MAC authentication based user
role.
— —
set-role-machine-auth
<machine_only>
<user_only>
Configures a machine authentication rule.
You can assign different rights to clients based
on whether their hardware device supports
— —
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan ssid-profile | 623