Concept Guide

Command/Parameter Description Range Default
enforce-dhcp
Enforces dynamic IP assignment for clients from
the DHCP server.
— Disabled
essid <essid>
Defines a name that uniquely identifies a
wireless network.
— —
external-server
Configures an external RADIUS server for
authentication.
— —
explicit-ageout-client
Allows the W-IAP to send a deauthentication
frame to the client and clear client entry.
— Disabled
g-min-tx-rate <rate>
Configures the specify the minimum
transmission rate for the 2.4 GHz band.
1-54 Mbps 1 Mbps
g-max-tx-rate <rate>
Configures the specify the maximum
transmission rate for the 2.4 GHz band.
1-54 Mbps 54 Mbps
hide-ssid
Hides the SSID. When enabled, the SSID will not
be visible for the users.
— Disabled
hotspot-profile <name>
Associates a hotspot profile with the WLAN SSID
profile.
— —
inactivity-timeout
<interval>
Configures a timeout value for the inactive client
sessions.
When a client session is inactive for the specified
duration, the session expires and the clients are
required to log in again.
60-86400
seconds
1000
index <idx>
Assigns an index value for the SSID. — —
l2-auth-failthrough
Allows the clients to use 802.1X authentication
when MAC authentication fails.
— Disabled
leap-use-session-key
Allows the users to derive session keys for
Lightweight Extensible Authentication Protocol
(LEAP) authentication.
Configure this command for old printers that use
dynamic WEP and if you do not want use a
session key from the RADIUS Server to derive
pair wise unicast keys.
— Disabled
local-probe-req-thresh
<threshold>
Configures a Received signal strength indication
(RSSI) threshold value to limit the number of
incoming probe requests.
When enabled, this command controls the
0-100 dB —
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan ssid-profile | 619