Concept Guide

618 | wlan ssid-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
Command/Parameter Description Range Default
When 802.11k is enabled, W-IAPs and clients
send neighbor reports, beacon reports, and link
measurement reports to each other.
dot11r
Enables 802.11r on the SSID profile.
802.11r or fast BSS transition (FT) is an IEEE
standard that permits continuous connectivity
across wireless devices during client mobility.
Fast BSS Transition mechanism minimizes the
delay in roaming when a client transitions from
one BSS to another within the
same cluster.
Fast BSS Transition is operational only if the
wireless client supports 802.11r standard. If the
client does
support 802.11r standard, it falls back to normal
WPA2 authentication method.
— —
dot11v
Enables 802.11v based BSS transition. — —
dot1x-wpa-key-period
dot1x-wpa-key-retries
dtim-period <value>
Configures the Delivery Traffic Indication
Message (DTIM) interval for the SSID profile.
The DTIMinterval determines how often the W-
IAP should deliver the buffered broadcast and
multicast frames to associated clients in the
powersaving mode.
When configured, the client checks for buffered
data on the W-IAP at the specified number of
beacons. You can also configure a higher value
for DTIM interval for power saving.
1–10 beacons 1
dynamic-multicast-
optimization
Allows the W-IAP to convert multicast streams
into unicast streams over the wireless link.
Enabling Dynamic Multicast Optimization (DMO)
enhances the quality and reliability of streaming
video, while preserving the bandwidth available
to the non-video clients.
NOTE: When you enable DMO on multicast SSID
profiles, ensure that the DMO feature is enabled
on all SSIDs configured in the same VLAN.
— Disabled
enable
Re-enables the deactivated SSIDs. — Enabled