Concept Guide

60 | clock summer-time Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
clock summer-time
clock summer-time <timezone> recurring <start-week> <start-day> <start-month> <start-hour>
<eweek> <eday> <emonth> <ehour>
no…
Description
This command configures daylight saving for the time zones that support daylight saving time.
Syntax
Parameter Description Range
clock summer-time
<timezone>
Configures Daylight Saving time. Timezones
that support
daylight
saving
configuration
recurring
Indicates the recurrences. —
<start-week>
Indicates the week from which the daylight saving configuration is
effective.
—
<start-day>
Indicates the day from which the daylight saving configuration
applies.
—
<start-month>
Indicates the month from which the daylight saving configuration
applies.
—
<start-hour>
Indicates the hour from which the daylight saving configuration
applies.
1-24
<eweek>
Indicates the week in which the daylight saving configuration
ends.
—
<eday>
Indicates the day on which daylight saving configuration ends. —
<emonth>
Indicates the month in which daylight saving configuration ends. —
<ehour>
Indicates the hour at which daylight saving configuration ends. 1-24
no…
Removes the configuration —
Usage Guidelines
Use this command to configure daylight saving for the timezones that support daylight saving. When enabled,
the daylight saving time ensures that the W-IAPs reflect the seasonal time changes in the region they serve.
Example
The following example configures daylight saving for a timezone:
(Instant AP)(config)# clock summer-time PST recurring 7 10 March 9PM 38 10 October 9PM
(Instant AP)(config)# end