Concept Guide

598 | wlan access-rule Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
Command/Parameter Description Range Default
risk-sites
l suspicious-
sites
l high-risk-
sites
permit
Creates a rule to allow the specified
packets.
— —
deny
Creates a rule to reject the specified
packets
— —
<opt0…opt11>
Allows you to specify up to 10 options
for network ACLs and up to 12 options
for DPI ACLs. You can configure any of
the following options:
l Log—Creates a log entry when
this rule is triggered.
l Blacklist—Blacklists the client
when this rule is triggered.
l Classify-media—Performs a
packet inspection on all non-NAT
traffic and marks the critical
traffic.
l Disable-scanning—Disables ARM
scanning when this rule is
triggered.
l DSCP tag—Specifies a DSCP value
to prioritize traffic when this rule is
triggered.
l 802.1p priority—Sets an 802.1p
priority.
l Application throttling: To set a
bandwidth limit based on
application, application category,
web category or website
reputation, you can configure
application throttling by using the
throttle-downstream and
throttle-up options. For example,
you can limit the bandwidth rate
for video streaming applications
such as Youtube or Netflix, or set a
low bandwidth for suspicious
websites.
— —
vlan <vlan-id>
Configures an access rule for VLAN 1-4093 —