Concept Guide

Command/Parameter Description Range Default
guest users before the client
authentication.
set-role-unrestricted
Configures unrestricted access
control.
— —
set-vlan <attribute>
{equals|not-equals| starts-
with|
ends-with| contains}
<operator>
<VLAN-ID>| value-of}
Assigns a VLAN to the clients. The
first rule that matches the
configured condition is applied.
You can specify any of the
following conditions:
l contains—The rule is applied
only if the attribute value
contains the specified string.
l ends-with—The rule is applied
only if the attribute value ends
with the specified string.
l equals—The rule is applied
only if the attribute value is
equal to the specified string.
l not-equals—The rule is
applied only if the attribute
value is not equal to the
specified string.
l starts-with—The rule is
applied only if the attribute
value begins with the specified
string.
l value-of - This rule sets the
VLANto the value of the
attribute returned. To set a
user role, the value of the
attribute must already be
configured on the W-IAP.
— —
shutdown
Shuts down the admin status port up, down up
spanning-tree
Enables Spanning Tree Protocol
on the wired profile.
— —
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wired-port-profile | 591