Concept Guide

Command/Parameter Description Range Default
referred to as Native VLAN.
poe
Enables power over Ethernet — Enabled
radius-accounting
Enables accounting for the
RADIUS server authentication.
When enabled, the W-IAPs post
accounting information to the
Radius server at the specified
accounting interval.
— —
radius-accounting-mode
{user-association|user-
authentication}
Configures an accounting mode
for the captive portal users. You
can configure any of the following
modes for accounting:
l user-authentication—when
configured, the accounting
starts only after client
authentication is successful
and stops when the client logs
out of the network.
l user-association—When
configured, the accounting
starts when the client
associates to the network
successfully and stops when
the client is disconnected.
— user-
authentication
radius-interim-accounting-
interval <minutes>
Configures an interval for posting
accounting information as
RADIUS INTERIM accounting
records to the RADIUS server.
When configured, the W-IAP
sends interim-update messages
with current user statistics to the
RADIUS server at regular
intervals.
0–60 —
radius-reauth-interval
<minutes>
Configures a reauthentication
interval at which all associated
and authenticated clients must be
reauthenticated.
0–32768 —
server-load-balancing
Enables load balancing across
two RADIUS servers if two
authentication servers are
configured for the SSID.
— Enabled
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wired-port-profile | 589