Concept Guide

wired-port-profile
wired-port-profile <port>
access-rule-name <name>
allowed-vlan <vlan>
auth-server <name>
captive-portal {<type> [exclude-uplink <types>] | external [Profile <name>] [exclude-uplink
<types>]}
content-filtering
dot1x
duplex <duplex>
inactivity-timeout <interval>
l2-auth-failthrough
mac-authentication
native-vlan <vlan>
poe
radius-accounting
radius-accounting-mode {user-association|user-authentication}
radius-interim-accounting-interval <minutes>
radius-reauth-interval <minutes>
server-load-balancing
set-role <attribute>{{equals|not-equal|starts-with|ends-with|contains}<operator>
<role>|value-of}
set-role-mac-auth <mac-only>
set-role-machine-auth <machine-only> <user-only>
set-role-pre-auth <role>
set-role-unrestricted
set-vlan <attribute>{equals|not-equals|starts-with|ends-with|contains} <operator> <VLAN-
ID>|value-of}
shutdown
spanning-tree
speed <speed>
switchport-mode <mode>
type <type>
uplink-enable
no…
no wired-port-profile <port>
Description
This command configures a wired port profile for wired W-IAP clients.
Syntax
Command/Parameter Description Range Default
wired-port-profile <port>
Creates a wired profile. — —
access-rule-name <name>
Maps the already configured
access rules with the wired
profile.
— —
allowed-vlan <vlan>
Configures a list of allowed
VLANs. The Allowed VLAN refers
to the VLANs carried by the port
in Access mode.
You can configure the list of
— —
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wired-port-profile | 587