Concept Guide

576 | vpn monitor-pkt-lost-cnt Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
vpn monitor-pkt-lost-cnt
vpn monitor-pkt-lost-cnt <count>
no...
Description
This command configures the number of lost packets after which the W-IAP can determine that the VPN
connection is not available.
Parameter Description Range Default
vpn monitor-pkt-lost-cnt
<count>
Defines the number of lost packets for
VPN connection test or monitoring by the
W-IAP.
— 2
no…
Removes the configuration. — —
Usage Guidelines
Use this command to configure a count for the lost packets, so that the W-IAPs can determine if the VPN
connection is unavailable.
Example
The following example configures a count for the lost packets:
(Instant AP)(config)# vpn monitor-pkt-lost-cnt <count>
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode