Concept Guide
550 | telnet Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
telnet
telnet <host> port <port>
Description
This command initiates a telnet session with external servers from the Instant command line interface (CLI).
Syntax
Command/Parameter Description
host
The IPaddress of the destination server.
<port>
The physical port number of the server to which a connection
needs to be established through Telnet.
Usage Guidelines
Use this command to Telnet an external server using the Instant CLI.
Example
The following example initiates a telnet session with external servers:
(Instant AP) telnet 10.0.0.1 23
Command History
Version Description
Dell Networking W-Series Instant 6.4.3.1-
4.2
This port parameter was introduced.
Dell Networking W-Series Instant 6.3.1.1-
4.0
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXECmode.