Concept Guide

54 | cellular-uplink-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
l Huawei E1731 (Airtel-3G (India))
l Huawei E3765 (Vodafone (Aus))
l Huawei E3765 (T-Mobile (Germany)
l Huawei E1552 (SingTel)
l Huawei E1750 (T-Mobile (Germany))
l UGM 1831 (TMobile)
l Huawei D33HW (EMOBILE(Japan))
l Huawei GD01 (EMOBILE(Japan))
l Huawei EC150 (Reliance NetConnect+ (India))
l KDDI DATA07(Huawei) (KDDI (Japan))
l Huawei E353 (China Unicom)
l Huawei EC167 (China Telecom)
l Huawei E367 (Vodafone (UK))
l Huawei E352s-5 (T-Mobile (Germany))
l Huawei D41HW
l ZTE AC2726
The following table lists the supported 4G modems.
l Netgear U340
l Netgear Aircard 341u
l Fraklin Wireless u770
l Huawei 3276s-150
l MC551L
l Pantech UML295
l Pantech UML290
When UML290 runs in auto detect mode, the modem can switch from 4G network to 3G network or vice-
versa based on the signal strength. To configure the UML290 for the 3G network only, manually set the USB
type to pantech-3g. To configure the UML290 for the 4G network only, manually set the 4G USB type to
pantech-lte.
Example 1
The following example configures a cellular uplink profile:
(Instant AP)(config) # cellular-uplink-profile
(Instant AP)(cellular-uplink-profile)# usb-type sierra-net
(Instant AP)(cellular-uplink-profile)# usb-dev 0x0f3d68aa
(Instant AP)(cellular-uplink-profile)# usb-init 3,broadband
(Instant AP)(cellular-uplink-profile)# end
(Instant AP)# commit apply
Example 2
The following example configures a cellular uplink profile for UML295 Country US and ISP Pantech:
(Instant AP)(config) # cellular-uplink-profile
(Instant AP)(cellular-uplink-profile)# usb-type rndis-uml295
(Instant AP)(cellular-uplink-profile)# usb-dev 0x10a96064
(Instant AP)(cellular-uplink-profile)# usb-tty ttyACM0
(Instant AP)(cellular-uplink-profile)# end
(Instant AP)# commit apply