Concept Guide

516 | show tspec-calls Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
show tspec-calls
show tspec-calls
Description
This command displays the traffic specification (TSPEC) statistics when voice traffic is prioritized and TSPEC
function is enabled on an SSID.
Usage Guidelines
Use this command to view the TSPEC statistics.
Example
The following example shows the output of the show tspec-calls command:
TSPEC Stats
-----------
SSID Total ADDTS Accepted calls Refused calls DELTS Received DELTS Sent
---- ----------- -------------- ------------- -------------- ----------
Aruba-ap 0 0 0 0 0
Aruba-ap 0 0 0 0 0
TSPEC SSIDs
------------
SSID Radio Max Bandwidth Available Bandwidth
---- ----- ------------- -------------------
Aruba-ap 1 0.00 0.00
TSPEC Calls
-----------
Client Client MAC Allocated Bandwidth Active flows
------ ---------- ------------------- ------------
TSPEC SSIDs
------------
SSID Radio Max Bandwidth Available Bandwidth
---- ----- ------------- -------------------
Aruba-ap 0 0.00 0.00
TSPEC Calls
-----------
Client Client MAC Allocated Bandwidth Active flows
------ ---------- ------------------- ------------
The output of this command displays information about the voice calls, the SSIDs on which TSPEC is enabled,
and the W-IAP clients connected to the SSIDs with TSPEC enabled.
Command History
Version Description
Dell Networking W-Series Instant 6.4.3.1-
4.2
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode