Concept Guide

Parameter Description Range
Default
usb-dev <usb-dev>
Specifies the device ID of the
USB modem.
— —
usb-dial <usb-dial>
Specifies the parameter to
dial the cell tower.
— —
usb-init <usb-init>
Specifies the parameter name
to initialize the modem.
— —
usb-passwd <usb-passwd>
Specifies the password for the
account associated with the
subscriber of the selected ISP.
— —
usb-modeswitch <usb-
modeswitch>
Specifies the parameter used
to switch modem from
storage mode to modem
mode.
— —
usb-type <usb-type>
Configures the driver type for
the 3G modem.
acm,
airprime, hso,
option,
pantech-3g,
sierra-evdo,
sierra-
gsm,none
—
usb-tty <usb-tty>
Specifies the modem tty port. — —
usb-user <usb-user>
Specifies the username of
subscriber of the selected ISP.
— —
no…
Removes the configuration
settings of parameters under
the cellular-uplink-profile
command.
— —
no cellular-uplink-profile
Removes the cellular uplink
configuration profile.
— —
Usage Guidelines
Use this command to configure a cellular uplink profile on a W-IAP and modem parameters 3G /4G uplink
provisioning. Instant supports the use of 3G/4G USB modems to provide Internet backhaul to an Instant
network. The 3G/4G USB modems can be used to extend client connectivity to places where an Ethernet
uplink cannot be configured. This enables the W-IAPs to automatically choose the available network in a
specific region.
The3G and 4G LTE USB modems can be provisioned on W-IAP3WN/3WNP and W-IAP155/155P.
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide cellular-uplink-profile | 51