Concept Guide

498 | show snmp-configuration Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
show snmp-configuration
show snmp-configuration
Description
This command displays the Simple Network Management Protocol (SNMP) configuration details for a Virtual
Controller.
Usage Guidelines
Use this command to view the SNMP information configured on a Virtual Controller.
Example
The following example shows the output of show snmp-configuration command:
Engine ID:D8C7C8CBD420
Community Strings
-----------------
Name
----
Test
SNMPv3 Users
------------
Name Authentication Type Encryption Type
---- ------------------- ---------------
hallo SHA NONE
DES SHA DES
SNMP Trap Hosts
---------------
IP Address Version Name Port Inform
---------- ------- ---- ---- ------
192.0.2.1 v3 miro 162 Yes
The output of this command includes the following parameters:
Parameter Description
Engine ID
Displays the SNMP engine ID.
Community Strings
Displays the SNMP community strings..
SNMPv3 Users
Displays details about the SNMPv3 users.
Name
Indicates the name of the SNMP user.
Authentication Type
Indicates the authentication protocol configured for the SNMP users.
Encryption Type
Indicates the encryption type, for example, CBC-DES Symmetric Encryption
Protocol (DES) configured for SNMP users.
SNMP Trap Hosts
Displays the traps generated by the host system.
IP Address
Indicates the host IP address generating the SNM trap.
Version
Displays the SNMP version for which the trap is generated.