Concept Guide

Parameter Description
Retry count
Indicates the maximum number of authentication requests sent to the
RADIUSserver.
NAS IP address
Displays the IP address of the Network Access Server (NAS) if NAS is
configured.
NAS Identifier
Indicates the NAS identifier to be sent with the RADIUS requests.
In Use
Indicates if the server is in use.
RFC3576
Indicates if the W-IAPs are configured to process RFC 3576-compliant Change
of Authorization (CoA).
Airgroup RFC3576-ONLY
Indicates if W-IAPs are configured to be RFC 3576 compliant only.
Airgroup RFC3576 port
Indicates the port number used for sending AirGroup CoA.
Deadtime
Indicates the RADIUS server dead-time.
DRP IP
DRP Mask
DRP VLAN
Indicates the IP address, net mask, and DRP VLAN configuredfor Dynamic Proxy
Radius (DRP).
RadSec
RadSec Port
Indicates if RadSec protocol for the RADIUS communiation over TLS is enabled.
If RadSec is enabled, the RadSec port number is displayed.
Command History
Version Description
Dell Networking W-Series Instant
6.4.2.3.-4.1.2
This command is modified.
Dell Networking W-Series Instant
6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show radius-servers support | 491