Concept Guide

show log vpn-tunnel
show log vpn-tunnel [count]
Description
This command shows VPN tunnel status for the W-IAP.
Syntax
Parameter Description
count
Starts displaying the log output from the specified number of lines from the
end of the log.
Usage Guidelines
Use this command without the optional <count> parameter to view a complete table of VPN tunnel status.
Include the <count> parameter to display status for the specified count of VPN tunnels.
Command History
Version Description
Dell Networking W-Series Instant
6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show log vpn-tunnel | 473