Concept Guide

472 | show log user-debug Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
show log user-debug
show log user-debug [count]
Description
This command shows the W-IAP user debug logs.
Syntax
Parameter Description
count
Starts displaying the log output from the specified number of lines from the
end of the log.
Command History
Version Description
Dell Networking W-Series
Instant 6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode