Concept Guide

show log debug
show log debug{count}
Description
This command shows the W-IAP full log.
Syntax
Parameter Description
<count>
Starts displaying the log output from the specified number of lines from the
end of the log.
Command History
Version Description
Dell Networking W-Series
Instant 6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show log debug | 459