Concept Guide

430 | show inbound-firewall-rules Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide

show inbound-firewall-rules

Description

This command displays the details of inbound firewall rules configured on a W-IAP.

Usage Guidelines

Use this command to view the details of the inbound firewall rules configured for a W-IAP network.

Example

The following output is displayed for the show inbound-firewall-rules command:

Access Rules

------------

Src IP Src Mask Dest IP Dest Mask Dest Match Protocol (id:sport:eport) Application

Action Log TOS 802.1P Blacklist App Throttle (Up:Down) Mirror DisScan ClassifyMedia

------ -------- ------- --------- ---------- ------------------------- -----------

------ --- --- ------ --------- ---------------------- ------ ------- -------------

any any any any match h323-tcp

permit

any any 192.0.2.0 255.255.255.0 match h323-udp

permit

The output of this command displays information about the inbound firewall access rule configuration

parameters, which indicate whether a particular type of traffic is to allowed to a particular destination from the

source subnet, and the service and protocol in use. It also indicates if other options such as logging and

prioritizing traffic are enabled when the rule is triggered.

Command History

Version Description

Dell Networking W-Series Instant

6.4.0.2-4.1

This command is introduced.

Command Information

W-IAP Platform Command Mode

All platforms

Privileged EXEC mode