Concept Guide

Parameter Description
l Centralized, L2
VLAN
Indicates the VLAN ID assigned to DHCP scope.
Netmask
Displays the subnet mask.
DNS Server
Displays the DNS server IP address.
Domain Name
Displays the domain name configured for the DHCP
scope.
Default router
Displays the IP address of the default router.
lease-time
Displays the lease-time configured for the DHCP clients.
IP Address Range
Displays the range of IP addresses configured for the
distributed DHCP scopes.
client-count <number>
Displays the number of clients allowed per DHCP branch.
DHCP Option
Displays the DHCP option if configured.
Reserve First and Reserve Last
Displays the first few and the last few IP addresses
reserved in the subnet.
Branch ID
Displays the DHCP branch ID.
Branch Netmask
Displays the branch subnet mask.
Branch Router
Displays the IP address if the branch router.
Exclude IP address
Displays the excluded IP address. The value displayed in
this determines the exclusion range of the subnet. Based
on the size of the subnet, the IP addresses that come
before or after the IP address value specified in this field
are excluded.
DHCP Relay
Displays the DHCP relay information that enables the W-
IAPs to intercept the broadcast packets and relay DHCP
requests directly to corporate network.
DHCP Relay Server
Displays the IP address of the corporate DHCP server for
the DHCP request relay.
Split Tunnel
Indicates if the split-tunnel function is enabled or
disabled.
DHCP Host
Indicates the DHCP host name if configured.
DNS cache
Indicates if DNS caching is enabled or disabled.
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show dhcps config | 401