Concept Guide

282 | show ap debug airwave-restore-status Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
show ap debug airwave-restore-status
show ap debug airwave-restore-status
Description
This command displays information about the status of the W-IAP configuration restoration on the W-AirWave
server.
Usage Guidelines
If the W-IAPs managed by W-AirWave are not able to connect to the W-AirWave server, W-IAP can load the
backed up configuration received by W-AirWave after five minutes. This command displays the restoration
status of the W-IAP configuration for the W-IAPs managed by W-AirWave.
Example
The output of the show ap debug airwave-restore-status command displays the restoration flag and time.
The following example shows the output of this command:
Airwave Config Restore
----------------------
Restore flag Time
------------ ----
No N/A
Command History
Version Description
Dell Networking W-Series Instant 6.4.3.1-4.2
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode