Concept Guide

250 | show ap allowed-channels Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
show ap allowed-channels
show ap allowed-channels
Description
This command displays a list of allowed channels for a W-IAP.
Usage Guidelines
Specify the country code for your W-IAP during the initial setup. Changing the country code causes the valid
channel lists to be reset to the defaults for that country.
Example
The following example shows the output of the show ap allowed-channels US command for the W-IAP215
device:
Allowed Channels for AP Type 215 Country Code US
------------------------------------------------
PHY Type Allowed Channels
-------- ----------------
802.11g (indoor) 1 2 3 4 5 6 7 8 9 10 11
802.11a (indoor) 36 40 44 48 149 153 157 161 165
802.11g (outdoor) 1 2 3 4 5 6 7 8 9 10 11
802.11a (outdoor) 149 153 157 161 165
802.11g 40MHz (indoor) 1-5 2-6 3-7 4-8 5-9 6-10 7-11
802.11a 40MHz (indoor) 36-40 44-48 149-153 157-161
802.11g 40MHz (outdoor) 1-5 2-6 3-7 4-8 5-9 6-10 7-11
802.11a 40MHz (outdoor) 149-153 157-161
802.11a 80MHz (indoor) 36-48 149-161
802.11a 80MHz (outdoor) 149-161
802.11a (DFS)
The output of this command includes the following information:
Parameter Description
PHY Type
Indicates the PHY type.
Allowed Channels
Displays the list of allowed channels for a specific regulatory domain.
Command History
Version Description
Dell Networking W-Series Instant
6.4.3.1-4.2
The <country-code> parameter was removed.
Dell Networking W-Series Instant
6.2.1.0-3.3
This command is introduced.