Concept Guide

mtu
mtu <size>
no…
Description
This command configures the maximum transmission unit (MTU) size for the uplink interfaces.
Syntax
Parameter Description
mtu <size>
Configures MTU size.
no…
Removes the configuration.
Usage Guidelines
Use this command to configures the MTU size for tunnel and br0 interfaces, and uplink interfaces such as
3G/4G. The configured MTU size is applied when the uplink changes.
Example
The following example sets the MTU size to 1200 bytes:
(Instant AP)(config)# mtu <1200>
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.4.3.1-
4.2
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide mtu | 187