Concept Guide

14 | a-channel Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide

a-channel

a-channel <channel> <tx-power>

Description

This command configures 5 GHz radio channels for a specific W-IAP.

Syntax

Parameter Description Range

Configures the specified 5 GHz channel. The valid channels for a band

are determined by the AP

regulatory domain.

<tx-power>

Configures the specified transmission

power values.

0-127 dBm

127dBM is the maximum

possible power that you can set

for a radio. Although the W-IAP

allows you to set the

transmission power to the

127dBM, power is allocated

based on the limits set by the

radio hardware and country

code in which the W-IAP

operates. The country code

and the W-IAP hardware may

support significantly lower

transmission power values

than 127dBm and in such

cases, the transmission power

limit set by the country code

and the W-IAP hardware takes

precedence.

Usage Guidelines

Use this command to configure radio channels for the 5 GHz band for a specific W-IAP.

Example

The following example configures the 5 GHz radio channel:

(Instant AP)# a-channel 44 18