Concept Guide

Parameter Description
Range Default
p2p-dev-mgmt
Advertises support for P2P
device management.
— Disabled
pame-bi
Enables the Pre-Association
Message Exchange BSSID
Independent (PAME-BI) bit, which
is used by an AP to indicate
whether the AP indicates that the
Advertisement Server can return
a query response that is
independent of the BSSID used
for the GAS Frame exchange.
— —
query-response-length-
limit
<len>
Configures the maximum length
of the Generic Advertisement
Service (GAS query response.
GAS enables advertisement
services that allow the clients to
query multiple 802.11 networks
at once, while also allowing the
client to learn more about a
network’s 802.11 infrastructure
before associating.
If a client transmits a GAS Query
using a GAS Initial Request
frame, the responding W-IAP will
provide the query response (or
information on how to receive
the query response) in a GAS
Initial Response frame.
1-127 127
roam-cons-len-1
Configures the length of the OI.
The value of the roam-cons-len-
1parameter is based upon the
number of octets of the roam-
cons-oi-1 field.
0: Zero Octets in
the OI (Null),
3: OI length is 24-
bit (3 Octets),
5: OI length is 36-
bit (5 Octets)
—
roam-cons-len-2
Length of the OI. The value of the
roam-cons-len-2parameter is
based upon the number of octets
of the roam-cons-oi-2 field.
0: Zero Octets in
the OI (Null),
3: OI length is 24-
bit (3 Octets),
5: OI length is 36-
bit (5 Octets)
—
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hotspot hs-profile | 137