Concept Guide

136 | hotspot hs-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
Parameter Description
Range Default
comeback-mode
By default, ANQP information is
obtained from a GAS Request
and Response. If you enable the
comeback-mode option,
advertisement information is
obtained using a GAS Request
and Response. as well as a
Comeback-Request and
Comeback-Response. This option
is disabled by default.
— —
enable
Enables the hotspot profile.
— —
gas-comeback-delay
<delay>
Configures a GAS comeback
delay interval after which the
client can attempt to retrieve the
query response using a
Comeback Request Action frame.
100—2000
milliseconds
500
group-frame-block
Configures the Downstream
Group Addressed Forwarding
(DGAF) Disabled Mode. This
feature ensures that the W-IAP
does not forward downstream
group-addressed frames. It is
disabled by default, allowing the
W-IAP to forward downstream
group-addressed frames.
— —
hessid
Configures a homogenous ESS
identifier (HESSSID)
MAC address in
colon-separated
hexadecimal
format
—
internet
Allows the W-IAP to send an
Information Element (IE)
indicating that the network
allows the Internet access. By
default, a hotspot profile does
not advertise network internet
access.
— —
no
Removes any existing
configuration.
— —
p2p-cross-connect
Advertises support for P2P Cross
Connections.
— Disabled