Concept Guide

hotspot anqp-roam-cons-profile
hotspot anqp-roam-cons-profile <profile-name>
enable
roam-cons-oi <roam-cons-oi>
roam-cons-oi-len <roam-cons-oi-len>
no…
Description
This command configures the Roaming Consortium Organization Identifier (OI) information to be sent in an
Access network Query Protocol (ANQP) information element in a Generic Advertisement Service (GAS) query
response.
Syntax
Parameter Description
Range
hotspot anqp-roam-cons-profile
<profile-name>
Creates roaming consortium profile.
—
enable
Enables the roaming consortium profile. —
roam-cons-oi
<roam-cons-oi>
Sends the specified roaming consortium OI
in a GAS query response. The OI must be a
hexadecimal number 3-5 octets in length.
Hexadecimal
number 3-5
octets in
length
roam-cons-oi-len
<roam-cons-oi-len>
Indicates the length of the OI. The value of
the roam-cons-oi-len parameter must equal
upon the number of octets of the roam-
cons-oi field.
l 0: 0 Octets in the OI (Null)
l 3: OI length is 24-bit (3 Octets)
l 5: OI length is 36-bit (5 Octets)
—
no…
Removes any existing configuration.
—
Usage Guidelines
Use this command to configure the roaming consortium OIs assigned to service providers when they register
with the IEEE registration authority. The Roaming Consortium Information Elements (IEs) contain information
about the network and service provider, whose security credentials can be used to authenticate with the W-IAP
transmitting this IE.
Example
The following command defines the roaming consortium OI and OI length in the ANQP roaming consortium
profile:
(Instant AP)(config)# hotspot anqp-roam-cons-profile profile1
(Instant AP)(roaming-consortium "profile1")# roam-cons-oi 506F9A
(Instant AP)(roaming-consortium "profile1")# roam-cons-oi-len 3
(Instant AP)(roaming-consortium "profile1")# enable
(Instant AP)(roaming-consortium "profile1")# end
(Instant AP)# commit apply
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hotspot anqp-roam-cons-profile | 117