Concept Guide

hotspot anqp-nwk-auth-profile
hotspot anqp-nwk-auth-profile <profile-name>
enable
nwk-auth-type <auth-type>
url <url>
no…
Description
This command configures an ANQP network authentication profile to define authentication type being used by
the hotspot network.
Syntax
Parameter Description
Range
hotspot anqp-nwk-auth-profile
<profile-name>
Configures an ANQP network authentication
profile.
—
enable
Enables the network authentication profile. —
nwk-auth-type
Defines the network Authentication type being
used by the hotspot network.
—
<auth-type>
Allows you to specify any of the following
values:
l accept-term-and-cond—When configured,
the network requires the user to accept
terms and conditions.
NOTE: This option requires you to specify a
redirection URL string as an IP address, FQDN
or URL.
l online-enrollment—When configured, the
network supports the online enrollment.
l http-redirect—When configured, additional
information on the network is provided
through HTTP/HTTPS redirection.
l dns-redirect—When configured, additional
information on the network is provided
through DNS redirection.
NOTE: This option requires you to specify a
redirection URL string as an IP address, FQDN
or URL.
accept-term-
and-cond,
online-
enrollment,
http-redirect,
dns-redirect
url
Configures URL, IP address, or FQDN used by
the hotspot network for the accept-term-and-
cond or dns-redirect network authentication
types.
—
no…
Removes any existing configuration.
—
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hotspot anqp-nwk-auth-profile | 115