Manualshelf

Concept Guide

ManualsBrandsDell ManualsAccess PlatformsW-Series 228 Access Points
361362363364365366367368369370
364 | Hotspot Profiles Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide
You can specify any of the following EAP methods for the nai-realm-eap-method <eap-method> command:
l identity— To use EAP Identity type. The associated numeric value is 1.
l notification—To allow the hotspot realm to use EAP Notification messages for authentication. The
associated numeric value is 2.
l one-time-password—To use Authentication with a single-use password. The associated numeric value is 5.
l generic-token-card—To use EAP Generic Token Card (EAP-GTC). The associated numeric value is 6.
l eap-tls—To use EAP-Transport Layer Security. The associated numeric value is 13.
l eap-sim—To use EAP for GSM Subscriber Identity Modules. The associated numeric value is 18.
l eap-ttls—To use EAP-Tunneled Transport Layer Security. The associated numeric value is 21.
l peap—To use protected Extensible Authentication Protocol. The associated numeric value is 25.
l crypto-card— To use crypto card authentication. The associated numeric value is 28.
l peapmschapv2— To use PEAP with Microsoft Challenge Handshake Authentication Protocol version 2
(MSCHAPV2). The associated numeric value is 29.
l eap-aka—To use EAP for UMTS Authentication and Key Agreement. The associated numeric value is 50.
The following table lists the possible authentication IDs and their respective values:
Authentication ID
Authentication Value
reserved
l Uses the reserved authentication
method.
l The associated numeric value is 0.
—
expanded-eap
l Uses the expanded EAP authentication
method.
l The associated numeric value is 1.
Use expanded-eap as the authentication value.
non-eap-inner-auth
l Uses non-EAP inner authentication type.
l The associated numeric value is 2.
The following authentication values apply:
l reserved— The associated numeric value is 0.
l pap—The associated numeric value is 1.
l chap—The associated numeric value is 2.
l mschap—The associated numeric value is 3.
l mschapv2—The associated numeric value is 4.
Table 70: NAI Realm Profile Configuration Parameters