Concept Guide

289 | Services Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide
Figure 80 Services Window - Network Integration Tab
3. Select the Enable checkbox to enable PAN firewall.
4. Specify the user name and password. Ensure that you provide user credentials of the PAN firewall
administrator.
5. Enter the PAN firewall IP address.
6. Enter the port number within the range of 1—65535. The default port is 443.
7. Click OK.
In the CLI
To enable PANfirewall integration with the W-IAP:
(Instant AP)(config)# firewall-external-enforcement pan
(Instant AP)(firewall-external-enforcement pan)# enable
(Instant AP)(firewall-external-enforcement pan)# ip <ip-address>
(Instant AP)(firewall-external-enforcement pan)# port <port>
(Instant AP)(firewall-external-enforcement pan)# user <name> <password>
(Instant AP)(firewall-external-enforcement pan)# end
(Instant AP)# commit apply
Integrating a W-IAP with an XMLAPIinterface
The XML API interface provides options to create and execute user management operations seamlessly on
behalf of the clients or users.