Concept Guide
136 | Captive Portal for Guest Access Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide
Parameter Description
l Select New for configuring a new external RADIUSor LDAP server for
authentication.
Load balancing Select Enabled to enable load balancing if two authentication servers are
used.
Reauth interval Select a value to allow the APs to periodically reauthenticate all associated
and authenticated clients.
Blacklisting
(Applicable for WLAN SSIDs only.)
If you are configuring a wireless network profile, select Enabled to enable
blacklisting of the clients with a specific number of authentication failures.
Accounting mode
(Applicable for WLAN SSIDs only.)
Select an accounting mode from Accounting mode for posting accounting
information at the specified accounting interval. When the accounting mode
is set to Authentication, the accounting starts only after client
authentication is successful and stops when the client logs out of the
network. If the accounting mode is set to Association, the accounting starts
when the client associates to the network successfully and stops when the
client is disconnected.
Accounting interval Configure an accounting interval in minutes within the range of 0–60, to
allow APs to periodically post accounting information to the RADIUS server.