Concept Guide

988| show ap arm virtual-beacon-report Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
9c:1c:12:fe:13:50 52 -73 21
9c:1c:12:fe:0f:d0 52 -74 24
9c:1c:12:fd:f7:b0 44 -49 20
6c:f3:7f:e7:5a:b0 60 -73 12 Y
9c:1c:12:fd:f2:30 60 -69 12
9c:1c:12:fd:f7:a0 1 -55 12
9c:1c:12:fd:f2:20 1 -65 12
9c:1c:12:fe:13:40 1 -68 12
The output of this command includes the following parameters:
Parameter Description
AP
MAC address of the AP from which the client can detect a signal
Channel
Channel on which the signal was deteched
Signal
Signal strength, in dBm, of the probe request received from Client
EIRP
Amount of power transmitted from the AP antennae
Assoc
A "Y" in this field indicates that the client is currently associated to that AP
radio
Related Commands
Use the following command to enable the client match feature
l rf arm-profile client-match
The following commands display additional statistics for the client match feature
l show ap arm client-match probe-report
l show ap arm client-match neighbors
l show ap arm client-match restriction-table
l show ap arm virtual-beacon-report
l show ap arm client-match unsupported
l show ap arm client-match summary
l show ap arm client-match history