Concept Guide

731| rf arm-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Release Modification
l cm-max-steer-fails
l cm-report-interval
l cm-stale-age
l cm-sticky-check-interval
l cm-sticky-min-signal
l cm-sticky-snr
l cm-sticky-snr-delta
l cm-update-interval
l cm-unst-ageout-interval
ArubaOS 6.3.1.0 The cellular-handoff-assist parameter was introduced.
ArubaOS 6.4 The cm-lb-signal-delta parameter was introduced.
ArubaOS 6.4.1.0 The default values for the following parameters were changed:
l cm-band-g-max-signal (from N/A to 45)
l cm-sticky-snr (from 25 to 18)
l cm-sticky-min-signal (from 70 to 65)
l cm-lb-client-thresh (from 10 to 30)
ArubaOS 6.4.2.3 The cm-dot11v parameter was introduced.
ArubaOS 6.4.4.0 The cm-mu-snr-thresh and cm-mu-client-thresh parameters were
introduced.
Introduced support for the default-a and default-g ARM profiles. The
following parameters in the default-a and default-g profiles changed from
the previous default profile.
l arm-max-tx-power
l arm-min-tx-power
l arm-error-rate-threshold
l arm-error-rate-wait-time
ArubaOS 6.5 The following parameters were introduced:
l 160MHz-support
l interfering-ap-weight
l dynamic-bw
l dynamic-bw-beacon-failed-thresh
l dynamic-bw-cca-ibss-thresh
l dynamic-bw-cca-intf-thresh
l dynamic-bw-clear-time
l dynamic-bw-wait-time