Concept Guide

interface fastethernet | gigabitethernet
interface
interface {fastethernet|gigabitethernet} <slot>/<module>/<port>
bandwidth-contract <name>|{{app <app-name>|appcategory <app-category-name>} <bw-contract-
name>} upstream|downstream [exclude]
description <string>
duplex {auto|full|half}
ip access-group <name> {in|out|session {vlan <vlanId>}}
jumbo
lacp {group|port-priority|timeout}
lldp {fast-transmit-counter <1-8>|fast-transmit-interval <1-3600>|med|receive
|transmit|transmit-hold <1-100>|transmit-interval <1-3600> }600>
no ...
port monitor {fastethernet|gigabitethernet} <slot>/<module>/<port>
priority-map <name>
shutdown
spanning-tree {[bpduguard]|[cost <value>]|[point-to-point]|[port-priority <value>]|
[portfast] [vlan]}
speed {10|100|auto}
switchport {access vlan <vlan>|mode {access|trunk}|port-security maximum <num> level
<level> [interval <seconds>]
trunk {allowed vlan {<vlans>|add <vlans>|all|except <vlans>|remove <vlans>}|native vlan
<vlan>}}
trusted {vlan <word>}
tunneled-node-port
xsec {point-to-point <macaddr> <key> allowed vlan <vlans> [<mtu>]|vlan <vlan>}
Description
This command configures a FastEthernet or GigabitEthernet interface on the controller.
Syntax
Parameter Description Range Default
<slot>/<module>/<port>
The slot, module and port
numbers assigned to the
network interface embedded
in the controller.
— —
bandwidth-contract
Apply a bandwidth contract to
all upstream of downstream
traffic, or to traffic for a
specified application or
application category
— —
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide interface fastethernet | gigabitethernet | 449