Concept Guide

43| aaa authentication-server radius Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
The called-station-id parameter
can be configured to include AP
group, AP MAC address, AP
name, controller IP, controller
MAC address, or user vlan.
The default value is controller
MAC address.
clone <server>
Name of an existing RADIUS
server configuration from which
parameter values are copied.
— —
cppm username <username>
password <password>
Configure the CPPM username
and password. The controller
authenticating to CPPM is
enhanced to use configurable
username and password instead
of support password. The support
password is vulnerable to attacks
as the server certificate
presented by CPPM server is not
validated.
— —
enable
Enables the RADIUS server. — —
enable-ipv6
Enables the RADIUS server in
IPv6 mode.
— —
enable-radsec
Enables RadSec for RADIUS data
transport over TCPand TLS.
— —
host
Identify the RADIUS server either
by its IP address or fully qualified
domain name.
— —
<ipaddr>
IPv4 or IPv6 address of the
RADIUS server.
— —
<FQDN>
Fully qualified domain name
(FQDN) of the RADIUS server. The
maximum supported length is 63
characters.
— —
key <psk>
Shared secret between the
controller and the authentication
server. The maximum length is
128 characters.
— —