Concept Guide

copy
copy
flash: <srcfilename> {flash: <destfilename> | scp: <scphost> <username> <destfilename>
tftp: <tftphost> <destfilename> | usb: partition {0|1} <destfilename>}
ftp: <ftphost> <user> <filename> {flash: <destfilename> | system: partition [0|1]}
running-config {flash: <filename> | ftp: <ftphost> <user> <filename> [<remote-dir>] |
startup-config | tftp: <tftphost> <filename>}
scp: <scphost> <username> <filename> {flash: <destfilename>| system: partition [0|1]}|
startup-config {flash: <filename> | tftp: <tftphost> <filename>} |
system: partition {<srcpartition> 0|1} [<destpartition> 0 | 1] |
tftp: <tftphost> <filename> {flash: <destfilename> | system: partition [0|1]}
usb: partition <partition-number> <filename> flash: <destfilename>
Description
This command copies files to and from the controller.
Syntax
Parameter Description
flash:
Copy the contents of the controller’s flash file system, the system image,
to a specified destination.
<srcfilename>
Full name of the flash file to be copied.
flash:
Copy the file to the flash file system.
<destfilename>
Specify the new name of the copied file.
tftp:
Copy the file to a TFTP server.
<tftphost>
Specify the IP address or hostname of the TFTP server.
usb:
Copy the file to an attached USB storage device.
partition
Specify the partition on the USBdevice.
ftp:
Copy a file from the FTP server.
NOTE: Using this parameter, a password is required to access the FTP
server. The password is masked, and must be entered in a separate line.
<ftphost>
Specify the IP address or hostname of the FTP server.
<user>
User account name required to access the FTP server.
<filename>
Full name of the file to be copied.
flash: <destfilename>
Copy to the flash file system.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide copy | 294