Concept Guide

wlan voip-cac-profile
wlan voip-cac-profile <profile-name>
allow-idle-voip-client
bandwidth-cac
bandwidth-capacity <bandwidth-capacity>
call-admission-control
call-capacity
call-handoff-reservation <percent>
clone <profile-name>
disconnect-extra-call
no ...
send-sip-100-trying
send-sip-status-code client|server <code>
wmm_tspec_enforcement
wmm_tspec_enforcement_period <seconds>
Description
This command configures a Voice over IP (VoIP) call admission control (CAC) profile.
Syntax
Parameter Description Range Default
<profile-name>
Name of this instance of the
profile. The name must be
1-63 characters.
— “default”
allow-idle-voip-client
If enabled, the AP allows idle
voice clients to associate
even if the AP reaches its
call capacity limit.
If disabled, the AP rejects
idle voice clients to
associate if the AP reaches
its call capacity limit.
However, the AP continues
to allow active (in-call) and
non-voice clients to
associate.
— disabled
bandwidth-cac
Select the desired CAC
mechanism:
l Disable - CAC is based
on Call Counts
l Enable - CAC should be
based on Bandwidth.
— disabled
bandwidth-capacity
Define the maximum
bandwidth that can be
handled by one radio, in
kbps. The default value is
2000 kbps (2 Mbps)
— —
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide wlan voip-cac-profile | 2372