Concept Guide

vpdn group pptp
vpdn group pptp
client configuration {dns|wins} <ipaddr1> [<ipaddr2>]
disable|enable
no ...
ppp authentication {MSCHAP|MSCHAPv2}
pptp echo <seconds>
Description
This command configures a PPTP VPN connection.
Syntax
Parameter Description Range Default
client configuration
Configures parameters for the remote
clients.
— —
dns
Configures a primary and optional secondary
DNS server.
— —
wins
Configures a primary and optional secondary
WINS server.
— —
disable|enable
Disables or enables termination of PPTP
clients.
— enabled
no
Negates any configured parameter. — —
ppp authentication
Enables the protocols for PPP authentication.
This list should match the PPTP configuration
configured with the vpn-dialer command on
the controller.
— —
MSCHAP
Use MSCHAP with PPP authentication. — —
MSCHAPv2
Use MSCHAPv2 with PPP authentication. This
is the default for L2TP
— —
pptp echo
Time, in seconds, that the controller waits for
a PPTP echo response from the client before
considering the client to be down. The client
is disconnected if it does not respond within
this interval.
10-300 60
seconds
Usage Guidelines
PPTP connections require user-level authentication through a PPP authentication protocol (MSHCAPv2 is the
currently-supported method.) Client addresses are assigned from a pool configured with the pptp command.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide vpdn group pptp | 2229