Concept Guide

219| ap system-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
rap-dhcp-lease
The amount of days that the
assigned IP address is valid
for the client. Specify the
lease in <days>.
0 indicates the IP address is
always valid; the lease does
not expire.
0-30 0
rap-dhcp-pool-
end
Configures a DHCP pool for
remote APs. This is the last IP
address of the DHCP pool.
— 192.168.11.25
4
rap-dhcp-pool-
netmask
Configures a DHCP pool for
remote APs. This is the
netmask used for the DHCP
pool.
— 255.255.255.0
rap-dhcp-pool-
start
Configures a DHCP pool for
remote APs. This is the first IP
address of the DHCP pool.
— 192.168.11.2
rap-dhcp-server-id
IP address used as the DHCP
server identifier.
— 192.168.11.1
rap-dhcp-server-vlan
VLAN ID of the remote AP
DHCP server used if the
controller is unavailable. This
VLAN enables the DHCP
server on the AP (also known
as the remote AP DHCP
server VLAN). If you enter the
native VLAN ID, the DHCP
server is unavailable.
— —
rap-gre-mtu
Configures the maximum size
of the GRE packets exchanged
between a RAP and the
controller.
1024-1578
bytes
1200 bytes
rap-local-network
-access
Enable or disable local
network access across VLANs
in a Remote-AP.
— disabled
request-retry-
interval
Interval, in seconds, between
the first and second retries of
AP-generated requests. If the
configured interval is less
than 30 seconds, the interval
for subsequent retries is
increased up to 30 seconds.
1-65535 10 seconds