Concept Guide

show wms system
show wms system
Description
Show the WMS system configuration and system state.
Syntax
No parameters.
Example
This example shows the WMS System Configuration and System State tables.
(host) #show wms system
System Configuration
--------------------
Key Value
--- -----
max-threshold 0
max-rbtree-entries 0
max-system-wm 1000
system-wm-update-interval 8
System State
-------------
Key Value
--- -----
Max Threshold 25000
Current Threshold 230
Total AP Count 228
Total STA Count 5
MAX RB-tree Count 50000
Total Tree Count 195
Poll Count(Max) 1(2)
Learned OUIs for Deployed APs
------------------------------
OUI
---
00:1a:1e:00:00:00
Column Description
Max Threshold
The maximum number of table entries allowed. If this table displays a zero (0),
there is no configured limit.
NOTE: If a configured maximum limit has reached, the controller will not create
new WMS entries for monitored APs and monitored stations. If new APs are
deployed after this limit is reached, those APs will not be marked as 'valid', which
will impair the effectiveness of the Adaptive Radio Management feature. If there
are new Rogue APs in the network, they will not be classified as a rogue.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show wms system | 2150