Concept Guide

1910| show switches Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
IP address
IP address of the controller
MAC
MAC address of the controller
Hostname
hostname of the master controller
Model
Controller model type.
Version
Software version running on the controller
Status
A status of up indicates that the controller is active on the network. A status of down
indicates that the controller is inactive or unreachable by the master controller
Branch Group
Name of the branch config group assigned to the branch controller.
Configuration State
Status of the configuration assigned to the branch controller,
Branch Config ID
The branch config IDincrements every time the branch config group settings are
updated. All branch controllers assigned to the same branch config group should
display the same branch config ID, indicating that they are all running the same con-
figuration version.
Uptime
Amount of time the controller has been active on the network.
The output of the following command shows the regulatory file active on the controller.
(host) #show switches regulatory
All Switches
------------
IP Address Name Location Type Model File Version File Build
---------- ---- -------- ---- ----- ------------ ----------
172.16.0.254 host Building1.floor1 master W-7210 1.0_43859 21/4/2014
Command History
Version Description
ArubaOS 3.0
Command introduced.
ArubaOS 6.0
The version column in the output of this command was expanded to
include both the version and the build number for controllers running
ArubaOS 6.0 and later releases.
ArubaOS 6.4.1 The regulatory parameter was added.
ArubaOS 6.4.3 The branch parameter was added to display settings for branch office con-
trollers.