Concept Guide

show snmp trap-list
show snmp trap-list
Description
Displays the list of SNMP traps.
Syntax
No parameters.
Example
The output of this command shows the list of SNMP traps and the status.
(host) # show snmp trap-list
SNMP TRAP LIST
--------------
TRAP-NAME CONFIGURABLE ENABLE-STATE
--------- ------------ ------------
authenticationFailure Yes Enabled
coldStart Yes Enabled
linkDown Yes Enabled
linkUp Yes Enabled
warmStart Yes Enabled
wlsxAPActiveUplinkChanged Yes Enabled
wlsxAPBssidEntryChanged Yes Enabled
wlsxAPChannelChange Yes Enabled
wlsxAPDeauthContainment Yes Enabled
wlsxAPDown Yes Enabled
wlsxAPEntryChanged Yes Enabled
wlsxAPImpersonation Yes Enabled
wlsxAPInterferenceCleared Yes Enabled
wlsxAPInterferenceDetected Yes Enabled
wlsxAPManagedModeConfigFailureTrap Yes Enabled
wlsxAPModeChange Yes Enabled
wlsxAPNumColdStarts Yes Enabled
wlsxAPNumDown Yes Enabled
wlsxAPNumRadioDown Yes Enabled
wlsxAPNumUpgradeFailure Yes Enabled
wlsxAPNumWarmStarts Yes Enabled
wlsxAPPowerChange Yes Enabled
wlsxAPRadioAttributesChanged Yes Enabled
wlsxAPRadioEntryChanged Yes Enabled
wlsxAPSpoofingDetected Yes Enabled
wlsxAPTaggedWiredContainment Yes Enabled
wlsxAPUp Yes Enabled
wlsxAPWiredContainment Yes Enabled
wlsxAdhocNetwork Yes Enabled
...
...
...
wlsxWirelessHosteNetworkContainment Yes Enabled
wlsxWirelessHostedNetworkDeteced Yes Enabled
Command History
This command was available in ArubaOS 3.0
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show snmp trap-list | 1892