Concept Guide

1840| show rf arm-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Scan Interval 10 sec
Aggressive scanning true
Active Scan Disabled
ARM Over the Air Updates Enabled
Scanning Enabled
Multi Band Scan Enabled
VoIP Aware Scan Enabled
Power Save Aware Scan Disabled
Video Aware Scan Enabled
Ideal Coverage Index 10
Acceptable Coverage Index 4
Free Channel Index 25
Interfering AP Weight 25 %
Backoff Time 240 sec
Error Rate Threshold 50 %
Error Rate Wait Time 30 sec
Channel Quality Aware Arm Disabled
Channel Quality Threshold 70 %
Channel Quality Wait Time 120 sec
Minimum Scan Time 8
Load aware Scan Threshold 1250000 Bps
Mode Aware Arm Disabled
Scan Mode all-reg-domain
Client Match Enabled
Client Match report interval (sec) 30
Allows Client Match to Automatically Clear Unsteerable Clients after Ageout Enabled
Client Match Unsteerable Client Ageout Interval 2 Days 0 Hours
Client Match Band Steering G Max Signal (-dBm) 45
Client Match Band Steering A Min Signal (-dBm) 75
Client Match Sticky Client Check Interval (sec) 3
Client Match Sticky Client Check SNR (dB) 25
Client Match SNR Delta Bound(dB) 10
Client Match Sticky Min Signal 70
Client Match Steering Timeout (sec) 10
Client Match Load Balancing Threshold (%) 20
Client Match IOS Steering Backoff Interval (sec) 300
Client Match VBR Stale Entry Age (sec) 120
Client Match Max Steering Failures 2
Client Match Load Balancing Client Threshold 10
Client Match Load Balancing SNR Threshold (dB) 77
Client Match Load Balancing Signal Delta Bound (dB) 5
Client Match 802.11v BSS Transition Management Enabled
Dynamic Bandwidth Switch Enabled
Dynamic Bandwidth Switch Wait Time (sec) 30
Dynamic Bandwidth Switch Triggering Indicator CCA ibss Threshold (%) 10
Dynamic Bandwidth Switch Triggering Indicator Beacon Failed Threshold 30
Dynamic Bandwidth Switch Triggering Indicator CCA intf Threshold (%) 30
Dynamic Bandwidth Switch Clear Time (min) 30
Client Match MU Client threshold 15
Client Match MU SNR threshold (dB) 30
The output of this command includes the following parameters:
Parameter Description
Assignment Displays the current ARM channel/power assignment mode.