Concept Guide

show port xsec
show port xsec
Description
Displays the list of xSec enabled ports.
Syntax
No parameters.
Example
The output of this command shows the list of xSec enabled ports.
(host) #show port xsec
Xsec Ports
----------
Interface xsec vlan state
--------- --------- -----
Command History
This command was available in ArubaOS 3.3.2
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or
local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show port xsec | 1782