Concept Guide

show pan-gp
show pan-options
Description
This command displays Palo Alto Networks portal or gateway settings on a branch or local controller.
Syntax
No parameters.
Usage Guidelines
Issue this command to view GlobalProtect protocol settings for a Palo Alto Networks portal or gateway on a on
a branch controller using the Palo Alto Networks firewall integration feature.
Examples
The following example displays the portal information seen by a branch controller connected to a Palo Alto
Networks portal.
(host) #show pan-gp portal-info
Global Protect Portal Information
=================================
Portal Config............. 172.16.2.1:443
Name...................... Portal-profile-1
State..................... GET CONFIG SUCCESS
Config Refresh Interval... 1 hours
Root CA Name.............. LSVPNCert
Gateway [01]
Name.............. 172.16.2.1
Desc.............. GW-1
Priority.......... 10
Gateway [02]
Name.............. 172.16.2.50
Desc.............. GW-2
Priority.......... 15
Refresh Timer Armed....... YES
Failure Timer Armed....... NO
The following example displays the gateway information seen by a branch controller connected to a Palo Alto
Networks gateway.
show pan-gp gateway-info
Global Protect Gateway Information
=================================
Name...................... PAN-GW-1
Description............... PAN-GW-1-S
State..................... GET CONFIG SUCCESS
Config Refresh Interval... 1 hours
Software Version.......... 1.0.0
Satellite Serial Number... SN000B8699E0D7
Accept published routes... YES
Gateway Address........... 172.16.2.1
Default Gateway........... 192.168.100.254
IP Address................ 192.168.100.87
IP Mask................... 255.255.255.255
Priority.................. 10
Keepalive Information
Enabled........... YES
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show pan-gp | 1763