Concept Guide

show ntp trusted-keys
show ntp trusted-keys
Description
Show information for the NTP trusted key
Syntax
No parameters.
Example
The following example shows values for the NTP authentication keys, Key ID and Md5 secret key.
(host) #show ntp authentication-keys
Key Id md5 secret
------ ----------
12345 4567
The output of this command includes the following parameters:
Parameter Description
Key ID
The key identifier used to when you configured the NTP authentication key.
md5 secret
The key value for the MD5 hash used when you configured the NTP authen-
tication key.
Related Commands
To configure NTP authentication keys, use the command ntp authentication-key.
Command History
This command was available in ArubaOS 6.1.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on local and
master controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ntp trusted-keys | 1746