Concept Guide

1439| show datapath Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
port
Displays the datapath port table information. This
includes the port number, PVID, Ingress ACL, Egress
ACL, Session ACL, and the following flags:
l B: Blocked by the Spanning Tree protocol
l L: LSG
l M: Tunneled node
l Q: Trunk
l T: Trusted
l X: xSec
l Z: QinQ
link-event
Displays port link up and link down event counters.
monitor
Displays the monitor port configuration.
stats <slot>/<module>/<port>
Displays the physical port statistics.
status <slot>/<module>/<port>
Displays the physical port status.
trusted
Displays the trusted ports.
tunneled-node
Displays the tunneled node ports.
untrusted-vlan <slot>/<module>/<port>
Show if there are untrusted vlan entries for the
indicated slot and port.
xsec
Displays the xsec ports.
rap-bw-resv
ap-name
ip-addr
Displays the remote AP uplink BW reservation
statistics of the RAP only.
rap-pkt-trace
ap-name
ip-addr
Displays the remote AP packet-trace statistics of the
RAP only.
rap-stats
ap-name
ip-addr
Displays the remote AP statistics of the RAP only.
route
Displays datapath route table statistics.
ap-name <ap-name>
Name of the AP.